Elmomc AC Input Digital Servo Drives-Cornet Manuel d'utilisateur télécharger pdf (Page 11)

Harmonica and Bassoon Cable Kits

MAN-CBLKIT- (Ver. 3.4)

4. Auxiliary Feedback Cable (CBL-MLXAUX-5)

The auxiliary feedback cable is a 24 AWG shielded twisted pair cable. It is connected using

an 8-pin Molex plug.

As described in the Auxiliary Feedback section(s) in the Harmonica and Bassoon Installation

Guides, the following four options are available for auxiliary feedback:

 Main encoder buffered outputs

 Differential encoder inputs

 Single-ended encoder input

 Pulse-and-direction input

The general pinout of the auxiliary feedback cable is as follows:

Pin No.

Color

Twisted &

Shielded Wire

Description

1 Brown Pair see Installation Guide

2 White

3 Green Pair see Installation Guide

4 Yellow

5 Gray Pair see Installation Guide

6 Pink

7 Blue Pair see Installation Guide

8 Red

Table 4-1: Auxiliary Feedback Cable for the Harmonica and Bassoon Drives

The specific functionality of each pin is fully outlined in the Harmonica and Bassoon

Installation Guides.

Figure 4: Auxiliary Feedback Cable (Part No. CBL-MLXAUX-5)

4-1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Pas de commentaire

Elmomc AC Input Digital Servo Drives-Cornet Manuel d'utilisateur Page 11