Elmomc SimplIQ Servo Drives Composer User Manual Manuel d'utilisateur télécharger pdf (Page 50)

2.13.3 Loading the Network

This option enables you to configure the Composer to communicate with several drives

simultaneously regardless of communication type. To load a network, you need to first

create the network .net file by establishing communication with the required

drives.

To create a network file:

1. Select Communication – Network – Save Network from the Composer menu bar.

The Save Network dialog box will be displayed.

2. Browse to the location at which the file should be saved, enter a name for the file and

click Save.

To load a network:

1. Either click Load Network from the Welcome to Composer Application window

displayed when you first access the Composer (section

2.2), or select Tools –

Network Load Network from the Composer menu bar. The Load Network dialog

box will be displayed:

2. From the Files of type drop-down list, select Network Files (*.net).

3. Browse to the location of your network file.

4. Click Open. The Composer will load the selected network. If communication with

one of the

drives fails, a Can’t open communication message will be displayed with

the parameters of that

drive. Click Abort to stop the network loading process, Retry

to attempt to reload the network, or Ignore to continue establishing communications

with the other

drives in the network.

Composer User Manual Using the Wizard

MAN-COMPUM (Ver. 1.9)

2-9

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 100 101

Pas de commentaire

Elmomc SimplIQ Servo Drives Composer User Manual Manuel d'utilisateur Page 50